NordicTrack Treadmill Motor Repair 248147
NordicTrack Treadmill Motor 248147 Rebuild Includes the Following:
Armature testing: test for shorted windings by a bar to bar electrical resistance ohm test. Test for insulation breakdown by 1,000 volt hi-pot, and a 500 volt megger test. Check shaft for straightness.
If windings pass the above tests, the armatures’ commutator is turned, undercut and polished to return the armature to its original condition, within .002” out of round. The reconditioned armature is checked for proper balance and rebalanced if needed. If the armature does not pass the above tests, armature is rewound with new commutator.
Magnets are checked for magnetism and chips or cracks are repaired.
Brush holders are tested for insulation leakage by 1,000 volt hi-pot and 500 volt megger tests.
Motor bearing journals are inspected and machined if needed
Bearings are replaced, Brushes are replaced
Motor reassembly and testing, Cleaning and painting, Labor
247660 (42105) Treadmill
247661 (42105) Treadmill
247662 (A2105) Treadmill
247663 (A2105) Treadmill
NTL069070 (42105) Treadmill
NTL069071 (A2105) Treadmill
NTL069072 (A2105) Treadmill
NTL069073 (A2105) Treadmill
NTL10850 (A2050) Treadmill
NTL10851 (A2050) Treadmill
NTL10950 (C2050) Treadmill
NTL10951 (C2050) Treadmill
NTL10952 (C2050) Treadmill
NTL10953 (C2050) Treadmill
Submit Your Quote Online Replace This Motor
Submit Your Order Online
Or Call: 800-423-4789
Monday - Friday, 8:00am - 5:00pm PST
Motor repairs and rewinds include everything necessary to return your motor to peak condition which may involve armature rewinding, field coil rewinding, stator rewinding, brake and clutch coil rewinding, tach rotor rewinding, encoders, resolvers, bearings, brushes, and machining. Because of these variables, it is usually best to send the motor to us first for evaluation, and then get a firm quote. For convenience, you can get an approximate quote by filling out the Repair This Motor Quote Form. We also offer Rush Service and Quantity Discounts.