NordicTrack Treadmill Motor Repair 248529

NordicTrack Treadmill Motor 248529  Rebuild Includes the Following:

Motor disassembly

Armature testing:  test for shorted windings by a bar to bar electrical resistance ohm test.  Test for insulation breakdown by 1,000 volt hi-pot, and a 500 volt megger test.  Check shaft for straightness.

If windings pass the above tests, the armatures’ commutator is turned, undercut and polished to return the armature to its original condition, within .002” out of round.  The reconditioned armature is checked for proper balance and rebalanced if needed.  If the armature does not pass the above tests, armature is rewound with new commutator.

Magnets are checked for magnetism and chips or cracks are repaired.

Brush holders are tested for insulation leakage by 1,000 volt hi-pot and 500 volt megger tests.

Motor bearing journals are inspected and machined if needed

Bearings are replaced,  Brushes are replaced

Motor reassembly and testing,  Cleaning and painting,  Labor

Warranty

NTL190070 (7500) Elite Treadmill
NTL190071 (7500) Elite Treadmill
NTL190072 (7500) Elite Treadmill
NTL190073 (7500) Elite Treadmill
NTL190074 (7500) Elite Treadmill
NTL190075 (7500) Elite Treadmill
NTL190076 (7500) Elite Treadmill
NTL190077 (7500) Elite Treadmill
NTL198060 (4200) Elite Treadmill
NTL198061 (4200) Elite Treadmill
NTL198062 (4200) Elite Treadmill
NTL198063 (4200) Elite Treadmill
NTL198064 (4200) Elite Treadmill
NTL198065 (4200) Elite Treadmill