NordicTrack Treadmill Motor Repair 260691
NordicTrack Treadmill Motor 260691 Rebuild Includes the Following:
Armature testing: test for shorted windings by a bar to bar electrical resistance ohm test. Test for insulation breakdown by 1,000 volt hi-pot, and a 500 volt megger test. Check shaft for straightness.
If windings pass the above tests, the armatures’ commutator is turned, undercut and polished to return the armature to its original condition, within .002” out of round. The reconditioned armature is checked for proper balance and rebalanced if needed. If the armature does not pass the above tests, armature is rewound with new commutator.
Magnets are checked for magnetism and chips or cracks are repaired.
Brush holders are tested for insulation leakage by 1,000 volt hi-pot and 500 volt megger tests.
Motor bearing journals are inspected and machined if needed
Bearings are replaced, Brushes are replaced
Motor reassembly and testing, Cleaning and painting, Labor
247771 (A2350) Treadmill
247772 (A2350) Treadmill
247773 (A2350) Treadmill
247775 (A2350) Treadmill
247776 (A2350) Treadmill
NTL070071 (A2350) Treadmill
NTL070072 (A2350) Treadmill
NTL070073 (A2350) Treadmill
NTL070075 (A2350) Treadmill
NTL070076 (A2350) Treadmill
NTL100080 (SR) Reflex Treadmill
NTL12950 (C2270) Treadmill
NTL12951 (C2270) Treadmill
NTL12952 (C2270) Treadmill
NTL12953 (C2270) Treadmill
NTL14952 (C2420) Treadmill
NTL16950 (3000R) Treadmill
Rebuild/rewind price is based on our costs at the date shown.
Or Call: 800-423-4789
Monday - Friday, 8:00am - 5:00pm PST